Ecoglo® Non-Slip Anodized Flat Stair Nosing for Safer Stairs, 2.7" Wide, F4-N20
Couldn't load pickup availability
F4-N20 Non-Slip Flat Stair Nosing
Add step-edge color contrast, long-lasting anti-slip protection, and a clean modern finish to indoor or outdoor stairs.
Stair Safety Benefits
- ✔ Flat non-slip stair nosing for safer stair edges.
- ✔ Provides strong step-edge color contrast.
- ✔ Helps reduce slips on busy stairways.
- ✔ Affordable way to renovate and modernize worn stairs.
- ✔ Suitable for concrete, timber, tile, steel, checker plate, and thin carpeted stairs.
Built for Durability
- ✔ Hard-wearing silicon carbide non-slip material bonded to aluminum.
- ✔ Built to handle thousands of foot passes with no visible wear.
- ✔ Thick anodized finish helps resist corrosion, abrasion, and daily traffic.
- ✔ 6063-T5 aluminum construction for long-term durability.
- ✔ Indoor and outdoor UV/weather resistant.
Finish & Color Options
- ✔ Available in mill, clear anodized, or black anodized finish.
- ✔ Light bronze and dark bronze anodized finishes available at additional cost.
- ✔ Available with black, grey, or yellow non-slip inserts.
- ✔ Black anodized nosings available.
Installation Details
- ✔ Install with polyurethane adhesive and mechanical fasteners, or adhesive only.
- ✔ Supplied with pre-drilled holes.
- ✔ Includes stainless steel fasteners and concrete nylon anchors.
- ✔ Standard hole location is 2 inches from each end and approximately 12 inches apart.
- ✔ Available in standard 8 ft and 10 ft lengths.
- ✔ Cut-to-length sizes available with ± 1/8 inch tolerance.
- ✔ Inserts available attached or unattached for easier on-site cutting.
Eco-Friendly
- ✔ LEED points qualified.
- ✔ Aluminum-based product is 100% recyclable with no disposal cost.
- ✔ Approximately 20% recycled aluminum content in Ecoglo secondary billet specification.
- ✔ Recommended low-VOC adhesive may support indoor environmental quality credits.
Tested Performance
- ✔ Tested for UV stability and outdoor durability.
- ✔ Tested for salt spray and freeze-thaw resistance.
- ✔ Tested to UL 410 slip resistance standards.
- ✔ Tested for abrasion resistance and washability.
- ✔ Tested for flammability.
- ✔ Made in USA.
Ecoglo F4-N20 is engineered with a bonded silicon carbide anti-slip insert and a durable anodized aluminum base. It helps improve stair safety by adding long-lasting traction and clear step-edge contrast.
Contractor & Distributor Pricing
Contractors, installers, property managers, and commercial buyers may qualify for special pricing on ComposiGrip™ stair tread covers, anti-slip strips, and safety products.
- Special pricing for qualifying contractors and distributors
- Bulk order support for commercial and residential projects
- ✔ Designed for concrete, wood, tile, steel & even thin carpeted stairs
- ✔ Helps improve inspection readiness with slip resistance & step edge contrast
- ✔ Trusted by contractors, builders & facility managers
- ✔ Reduces slip risks with silicon carbide anti-slip inserts
- ✔ Improves safety with high-contrast step edge visibility
Improve Stair Safety. Increase Visibility. Reduce Liability
⚠ Slips & Falls = Liability Risk
⚠ Worn or low-contrast edges = Trip hazards
⚠ High-traffic stairs = Faster wear & unsafe surfaces
F4-N20 Flat Stair Nosing improves traction, enhances step edge visibility, and helps create safer, more durable stairs.
Improve Stair Safety. Support Compliance. Reduce Risk
Prevent slips, improve step edge visibility, and help meet stair safety expectations with F4-N20 non-slip stair nosing engineered for durability and high-traffic use.
Increase Traction. Improve Visibility. Extend Stair Life.
Don’t Risk Slips, Falls — Or Inspection Issues
Worn stair edges, low traction, and poor step visibility can lead to serious injuries, failed inspections, and costly liability.
✔ Helps Improve Inspection Readiness
✔ Reduces Slip & Fall Risk
✔ Improves Step Edge Visibility
✔ Built for High-Traffic Durability
F4-N20 Flat Stair Nosing improves traction and adds high-contrast step edge definition, helping create safer, more durable stairs across concrete, wood, tile, and steel surfaces.
Engineered for Safer, Code-Ready Stairs
Designed to improve traction, enhance step edge visibility, and support stair safety expectations—helping you prepare for inspections and reduce slip-and-fall risk in high-traffic environments.
✔ Helps support stair safety compliance and inspection readiness
Designed for Commercial & High-Traffic Projects
- ✔ Concrete, Wood, Tile, Steel & Thin Carpeted Staircases
- ✔ Helps Improve Inspection Readiness & Stair Safety Compliance
- ✔ Ideal for Retrofits, Renovations & New Construction
- ✔ Used in Commercial Buildings, Schools, Warehouses & Public Spaces
- ✔ Trusted by Contractors, Architects & Facility Managers
Trusted Safety. Proven Performance.
Designed to meet strict safety standards and trusted in commercial environments across North America.
Always Reliable.
Built for Everyday Safety.
Delivering consistent traction and step edge definition to help reduce slips, improve visibility, and support safer stairs in high-traffic environments.
Why Ecoglo® F4-N20 Works
Durable. Slip-Resistant. Built for Real-World Performance.
✔ LEED Points Qualified
✔ Recyclable Aluminum – No Disposal Cost
✔ Slip-Resistant Surface (UL 410)
✔ High Abrasion Resistance for Heavy Traffic
✔ UV Stable – Indoor & Outdoor Performance
✔ Salt Spray & Corrosion Resistant
✔ Freeze-Thaw Resistant for Harsh Climates
✔ Easy to Clean & Low Maintenance
✔ Non-Flammable – Does Not Support Combustion
Ecoglo® F4-N20 Improves Stair Safety & Performance
Designed for Slip Resistance, Visibility & Long-Term Durability
Helps reduce slips, improve step edge visibility, and support safer stairways in commercial and high-traffic environments.
Slip Resistance
Designed to meet UL 410 standards for improved traction and safer stair surfaces.
Step Edge Visibility
High-contrast inserts improve step edge definition for better visibility and reduced trip risk.
Durability
Anodized aluminum construction offers abrasion resistance and corrosion protection.
Indoor & Outdoor Use
Tested for UV stability, salt resistance, and freeze-thaw performance.
Sustainability
Made from recyclable aluminum and contributes to LEED credits.
Fire Performance
Materials are non-flammable and do not support combustion.
Built for Safer, High-Traffic Stairs
Slip-Resistant • High Visibility • Long-Lasting Performance
F4-N20 flat stair nosing enhances grip and clearly defines step edges—helping reduce slips, improve visibility, and create safer stairways in commercial and high-traffic environments.
Designed for consistent traction and durability, F4-N20 performs reliably in demanding environments—indoors or outdoors—without ongoing maintenance.
Product Dimensions
Engineered for Durability & Precision Fit
Designed for long-term performance in commercial and high-traffic environments, Ecoglo® stair nosings are built to deliver consistent safety, precise installation, and reliable durability.
Product Details
Built for performance, durability, and long-term safety.
For Indoor & Outdoor Use.
Heavy-duty construction, easy installation, and custom sizing for professional stair safety upgrades.
Size & Weight
2.7" W x 1.3" H
Custom Length: 2, 4, 6, 8, or 10 FT
Weight: 0.462 LBS/FT
Included Hardware
Supplied with pre-drilled countersunk holes, plus stainless steel fasteners and concrete nylon anchors.
Hole Spacing
Standard hole location is 2" from each end and approximately 12" apart.
Custom Sizes
Custom-cut lengths available with a ±1/8” tolerance. Contact us for project-specific sizes.
Finishes
- 6063-T5 Aluminum, Mill Finish or with Clear or Black Anodized Finish.
- Type 2, Class 1 — 20 microns thickness
- Light Bronze and Dark Bronze anodized finishes available at additional cost
Easy Installation
Inserts can be supplied attached or unattached. Unattached is recommended for on-site cutting. Inserts are installed using premium polyurethane adhesive.
Why F4-N20 Stair Nosing Outperforms Alternatives
✔ Long-Term Durability ✔ Superior Grip ✔ Built for Commercial Use
Download F4-N20 Series Data Sheet
Detailed product specifications, dimensions, and compliance information for accurate planning and project approval.
Download Installation Guide
Step-by-step instructions to ensure fast, accurate installation and long-term performance.
Download Compliance Guide
Stay compliant with IBC, IFC, and fire safety codes. This guide helps ensure your project meets inspection requirements and avoids costly delays.
Talk to Our
Ecoglo® Safety Experts
Get expert guidance from engineers and photoluminescent safety specialists to ensure your project meets code, stays on schedule, and passes inspection.
Bulk Pricing • Code Compliance • Custom Solutions
Call 855.277.0306 • Trusted by contractors, architects & facility managers
Ecoglo® F4-N20 Anodized Flat Stair Nosing – Durable Non-Slip Protection for Commercial Stairs
Improve traction, increase step-edge visibility and modernize worn stairways with a durable anodized aluminum safety edge.
The Ecoglo® F4-N20 Anodized Flat Stair Nosing combines a hard-wearing silicon carbide non-slip insert with a durable 6063-T5 anodized aluminum profile. The anodized finish provides an attractive, corrosion-resistant and abrasion-resistant surface designed for long-term use in demanding commercial, institutional and public stair environments.
Suitable for installation over concrete, timber, tile, steel, checker plate and thin carpeted stairs, the F4-N20 offers a practical way to renovate stair edges without replacing the complete stair system.
The integrally bonded silicon carbide non-slip insert provides durable traction to help reduce the risk of slips on heavily travelled stairways.
The thick anodized coating creates a hard, attractive and abrasion-resistant surface that helps protect the aluminum against corrosion and everyday wear.
The colour-contrasting non-slip insert clearly defines the front edge of each stair, supporting safer foot placement and improved stairway visibility.
The non-slip material is permanently bonded to the anodized aluminum substrate for dependable performance in commercial, institutional and public environments.
Anodized Finish and Insert Options
Choose a clear or black anodized aluminum profile with a contrasting black, grey or yellow silicon carbide non-slip insert.
F4160: Grey insert
F4150: Yellow insert
F4260: Grey insert
F4250: Yellow insert
Recommended Applications
Technical Specifications
Listings and Performance Testing
Why Specify the Anodized F4-N20 Stair Nosing?
The anodized coating forms a durable surface that resists abrasion, staining and everyday wear.
Anodizing helps protect the aluminum profile in demanding indoor and outdoor environments.
Clear, black and bronze anodized finishes provide a clean architectural appearance for renovations and new construction.
The bonded silicon carbide insert and anodized aluminum profile provide a durable alternative for high-traffic stair edges.
Recyclable Aluminum and LEED Contribution
Specify the Anodized Ecoglo® F4-N20
Access technical specifications, CAD resources and BIM files, or request pricing for clear, black or special-order bronze anodized F4-N20 stair nosings.
Frequently Asked Questions – Ecoglo® F4-N20 Flat Stair Nosing
Will Ecoglo® F4-N20 stair nosing help improve inspection readiness?
In many cases, yes. Ecoglo® F4-N20 helps improve slip resistance and adds clear step edge contrast—two important factors in safer stair design. Final approval always depends on your local building codes and the authority having jurisdiction (AHJ).
Is Ecoglo® F4-N20 compliant with recognized safety standards?
Ecoglo® F4-N20 is designed to improve stair safety through enhanced traction and step edge visibility. For project-specific compliance, always confirm the exact code and performance requirements with your architect, consultant, or AHJ.
Is Ecoglo® F4-N20 suitable for egress pathways?
Yes. It can be used in egress pathways where improved slip resistance and visible step edge contrast are important. However, it is not a photoluminescent glow-in-the-dark system.
What does “egress-ready” mean for stair nosing?
For standard stair nosing, it generally means helping improve traction and edge visibility so stairs are safer to use. For projects that require visibility in darkness or during power failure, a photoluminescent stair nosing system may also be necessary.
Do these stair nosings glow in the dark?
No. The Ecoglo® F4-N20 stair nosings do not glow in the dark. They rely on high-contrast colors for visibility. For glow-in-the-dark performance and emergency egress compliance, a photoluminescent stair nosing system is required.
If your project requires glow-in-the-dark visibility for emergency egress, you’ll need a photoluminescent model like Ecoglo® C4-E20 luminescent stair nosing .
View Ecoglo® C4-E20 (Photoluminescent Option)
What is the difference between step edge contrast and visibility?
Step edge contrast refers to using contrasting colors such as yellow, black, or grey to make the front edge of each step easier to see in normal lighting.
Visibility refers to how clearly the stairs can be seen in changing lighting conditions. High contrast improves daytime and low-light awareness, but true visibility in darkness requires photoluminescent technology.
Is Ecoglo® F4-N20 visible in low light or at night?
Yes. Its high-contrast inserts help make stair edges easier to identify in low-light environments. Yellow typically offers the strongest visual contrast.
What surfaces can Ecoglo® F4-N20 be installed on?
Ecoglo® F4-N20 can be installed on concrete, wood, tile, steel, checker plate, and thin carpeted stairs, making it a flexible solution for many commercial and public applications.
Is aluminum stair nosing durable enough for heavy traffic?
Yes. Ecoglo® F4-N20 is built with anodized aluminum and durable anti-slip inserts for long-term performance in demanding, high-traffic environments.
How is Ecoglo® F4-N20 installed?
It can be installed using polyurethane adhesive, mechanical fasteners, or both. Pre-drilled holes and mounting hardware help make installation fast and secure.
Is Ecoglo® F4-N20 environmentally friendly?
Yes. It is made from recyclable aluminum and may contribute toward sustainability-focused building goals.
Ecoglo® Projects
-
Bank of America Plaza features Ecoglo®’s complete emergency egress system, including step-edge, handrail, and perimeter markings, plus emergency door indicators, directional signs, and floor ID signs.
-
Ecoglo® installed a complete egress pathmarking system with included handrail marking, perimeter marking, obstruction
markings and Ecoglo®’s stair nosing. -
Ecoglo® Products installed include UL 924 listed exit signs, photoluminescent directional signs and photoluminescent
pathmarking strips developed specifically for The Pentagon. -
The 6,500-seat Mississippi Coliseum in Jackson features Ecoglo®’s luminous handrail and step-edge markings to reduce trip and fall risks during major events.
Ecoglo®
Schools & Universities
Emergency egress, code compliance.
Boost stair safety in schools with Ecoglo®’s glow-in-the-dark contrast strips. Designed for high-traffic areas, they provide a non-slip grip and visible step edges—even during power outages. Ideal for stairwells, exits, and hallways.
Ecoglo®
Stadiums
Perfect for stadiums, these glow-in-the-dark strips enhance step visibility and traction in all lighting conditions. Durable and slip-resistant, they help guide crowds safely during power outages or low-light events.
Ecoglo®
Condo & Apartment Buildings
Reduce insurance risk.
Designed for condos and apartment buildings, these glow-in-the-dark strips improve stair safety by enhancing visibility and traction in all light conditions. Durable and low-maintenance, they help meet updated building and fire safety codes—ideal for stairwells, exits, and common areas.
Ecoglo®
Hospitality & Lodging
Guest safety during blackouts.
Perfect for hotels and lodging facilities, these glow-in-the-dark strips enhance guest safety by improving stair visibility and slip resistance. Durable and discreet, they help meet updated building codes and provide reliable guidance during low light or emergency situations.
General Information
Install with premium polyurethane adhesive.
- Option for mechanical fasteners.
- Do not use mechanical fasteners when installing outdoors.
- Available in cut to length sizes. (Tolerance +or- 1/8”) Standard lengths are 8ft and 10ft.
- Weight: 0.1 lbs/ft.
Engineered for Durability
- Manufactured using Ecoglo®’s patented process which produces the most durable and highly efficient photoluminescent product available.
- Unique ridges in the photoluminescent strips protect it from most abrasive wear. They provide slip resistance while still allowing the product to be easily cleaned.
- The hard-wearing silicon carbide non-slip material is integrally bonded to the aluminum substrate. Thousands of people can walk on it with no signs of wear and tear.
Superior Step Edge Safety
- The color contrasting the non-slip material with advanced photoluminescent technology provides step edge visibility in all light conditions.
- The unique ridges in the Ecoglo® photoluminescent strips and the integrated anti-slip contrast strips provide all-weather slip resistance.
Installed Durability:
- The rigid aluminum base spreads any applied load over a greater area of installation adhesive. Installation with a premium polyurethane adhesive/sealant is extremely durable, moisture resistant, and works very well on both smooth and textured surfaces.
For Indoor Use and Outdoor Use:
- Tested to accelerated UV/weathering exposure, and proven to be highly resistant to the effects of UV/weathering.
- The loss in performance is less than can be detected by the human eye when subjected to 6000 hours of UV exposure, which is similar to 30 years of outdoor exposure.
- The polymer used in Ecoglo’s patented process is “long chain” which forms a strong UV resistant product when bonding.
Environmentally Friendly Photoluminescent Contrast Strip
- LEED points qualified
- Zero energy consumption
- Non-Radioactive and Non-toxic
- Recyclable; No disposable cost
Need help with your project? Get in touch with us.
